Descriptions
12864 LCD display:
The smart controller includes an SD card reader, rotary encoder and a 20 character× 4-line LCD display.
You can easily connect it to your ramp 1.4 board with “smart”
Includes adapter
This panel connects your ramp 1.4, you don’t need your computer, your SD card
Intelligent controller power supply. All further operations, such as calibration, axes
Movement can only be done with a rotary encoder intelligent controller. 3 d design printing
Without a computer, you only need to use the G code design stored on the SD card.
Mechanical Endstop (connection description)
Connect the red line to VCC (slope +) and connect the black line GND (slope -).
Green line connection signal (slash at s)
The smart controller includes an SD card reader, rotary encoder and a 20 character× 4-line LCD display.
You can easily connect it to your ramp 1.4 board with “smart”
Includes adapter
This panel connects your ramp 1.4, you don’t need your computer, your SD card
Intelligent controller power supply. All further operations, such as calibration, axes
Movement can only be done with a rotary encoder intelligent controller. 3 d design printing
Without a computer, you only need to use the G code design stored on the SD card.
Mechanical Endstop (connection description)
Connect the red line to VCC (slope +) and connect the black line GND (slope -).
Green line connection signal (slash at s)
Specification
|
Dimensions and Weight |
Product weight: 0.5000 kg Package weight: 0.5200 kg |
|---|---|
|
Package Contents |
Package Contents: 1 x RAMPS 1.4 1 x Mega 2560 R3, 5 x DRV8825 Driver, 1 x LCD 12864 with Controller, 6 x Mechanical Switch with Cable, 5 x 4PIN 70CM Cables, 1 x Heatbed, 1 x USB Cable |
