Home » Shop » HAKRC Flytower F405 50A 4 in 1 3 – 6S ESC Black

HAKRC Flytower F405 50A 4 in 1 3 – 6S ESC Black

77$ (USD)

25% Off
Price Summary
  • 102$
  • 77$
  • 25%
  • 77$
  • Overall you save 25$ (25%) on this product
In Stock
SKU: 448750401 Categories: , ,


Main Features:
● There are many integrated functions of the flight control, and the components are very dense. When installing, please do not use tools ( such as needle-nosed pliers or sleeves ) to screw the nuts, which is easy to scratch the tower hardware and cause unnecessary losses. The correct way is to tighten the nut with your fingers and the screwdriver can quickly tighten the screw from the bottom. ( Remember not to be too tight, so as not to damage the PCB board )
● Do not install the propeller when installing and debugging the flight control, try not to fly indoors to avoid a safety accident. Before installing the propeller test, check again that the motor is turning and the propeller is in the correct direction. Safety Tip: Do not fly near the crowd. The company is not responsible for any loss caused by the crash of the aircraft.
● Do not use non-original aluminum or nylon columns to avoid damage to the flight control hardware. The official standard is a custom-sized nylon column for the fly tower.
● Before powering on the aircraft, please check whether the installation between the towers is correct ( must be arranged with the pins or cables aligned ), check again whether the positive and negative poles of the welding are correct, and check whether the motor screws are against the motor stator to avoid causing a short circuit.
● Check if there is any solder on the electronic parts of the tower, which may cause a short circuit. If the short circuit occurs in the installation of the solder, the buyer is responsible for it.

Flight control size:
Mounting hole distance: 30.5 x 30.5mm, φ4mm
Processor: STM32F405RGT6
Gyro: MPU6000
BEC: 5V/2A, 9V/2A
Memory: 16MB
Input voltage: 3 – 9S
Firmware: BetaFlight – 3.5.5 – HAKRCF405
Uart serial port: 5

Fixed hole spacing: 30.5 x 30.5mm, Φ3mm
Continuous current: 50A
Maximum current: 65A ( sustainable 10S )
Input voltage: 3 – 6S

Hardware performance:
HAKRC 50A ESC uses STSPIN32F0A 32-bit high-performance processor.
The original imported MOS tube is used, and the double MOS is connected in parallel to make the heat generation lower.
PCB board adopts 3oz copper thick multi-layer board for stronger overcurrent
5V/2A BEC output, support voltage return and current data transmission
Drive signal support: Dshot150 / 300 / 600 / 1200, Multishot, PWM, Oneshot.



Brand: HAKRC
Type: Flight Controller

Flight Controller

Flight Controller Type: F4

Dimensions and Weight

Product weight: 0.0650 kg
Package weight: 0.0800 kg
Product size (L x W x H): 3.60 x 3.60 x 0.10 cm / 1.42 x 1.42 x 0.04 inches
Package size (L x W x H): 6.50 x 6.00 x 3.50 cm / 2.56 x 2.36 x 1.38 inches

Package Contents

Package Contents: 1 x F405 Flight Control, 1 x 8P Double Terminal Line, 4 x Damping Coil, 1 x 50A ESC, 1 x 22uf Capacitor, 1 x XT60 Head Power Line, 4 x Screw, 1 x 8P Signal Line
Scroll To Top
0 Cart

My Cart

Shopping cart is empty!

Continue Shopping

HAKRC Flytower F405 50A 4 in 1 3 – 6S ESC Black
77$ (USD) Add to cart